1
/
of
7
Car Elements
Headliner Fabric Foam Backed Replace for DIY Truck SUV UV Car Roof Interior Upholstery 60"W Mid-Gray
Headliner Fabric Foam Backed Replace for DIY Truck SUV UV Car Roof Interior Upholstery 60"W Mid-Gray
Regular price
$35.99 USD
Regular price
Sale price
$35.99 USD
Unit price
/
per
Couldn't load pickup availability
Headliner Fabric Foam Backed Replace Automotive Roof Liner Upholstery
Replace your headliner material, matching automotive headliner fabrics, and make your vehicle's headliner look new again.
Headliner fabric material for restoring your old sagging headliner or that special restoration upholstery project. Foam backed material, underlay fabric for safety and comfort, durable, hard-wearing. 60” fixed width, compatible with most more car, truck, van or SUV. To determine the size you need, measure your vehicle headliner from front to back, then add 6 inches. Ideal for car and automotive interior roof lining and trimming.
It can be used on Automotive Seats, Sunroof Panel, RV, Marine Interiors, Door Panels, Headliner, Home/Furniture or Commercial Applications.
Headliner Installation Tips -Not Glue inclued
Step 1: First you need to remove the sagging Headliner;
Step 2: Find a good, large, clean area to work lay the headliner face up on the table Nest, spray the strong glue on the strip about 6" wide down the middle of the headliner, have a friend hold the materials up above the headliner while you use the plastic paint guide to smooth the materials on to the glue. After a couple of minutes, pull the materials back so that you can spray one of the sides that dones not yet have glue on it, Spray the adhesive, and repeat the process of smoothing. continue with this until the fabric has been glued down on the entire surface of headliner;
Step 3: After the glue has a night to set up, turn the headliner over. Cut some slits in the fabric to make it easier to wrap around the edge and, run a head of glue along the edge of the headliner and fold the fabric over and press it down. Try to make the fabric conform as closely to the edge as possible;
Step 4: Cut holes in the fabric for the dome light, sun visor and the clips that hold it up, replace the headliner.
Note:
1. The roof liner fabric is folded for delivery, not delivered in rolls. Used a dish towel and a steam iron to remove wrinkles from being folded during shipping.
2. Just measure the length and width of your vehicle's headliner to make sure you order enough material to recover it. If you need other size, pls contact us first.
Tips: Suggesting slightly larger size!
Replace your headliner material, matching automotive headliner fabrics, and make your vehicle's headliner look new again.
Headliner fabric material for restoring your old sagging headliner or that special restoration upholstery project. Foam backed material, underlay fabric for safety and comfort, durable, hard-wearing. 60” fixed width, compatible with most more car, truck, van or SUV. To determine the size you need, measure your vehicle headliner from front to back, then add 6 inches. Ideal for car and automotive interior roof lining and trimming.
It can be used on Automotive Seats, Sunroof Panel, RV, Marine Interiors, Door Panels, Headliner, Home/Furniture or Commercial Applications.
- Automotive Roof Liner Upholstery.
- Foam backed, safety, comfort and sound deadening, also affordable.
- Recover Dirty Sagging Falling Down Shedding headliners/ door panels, pillars.
- Lightweight, 1/8" thick, and is made from 100% polyester.
- Non-toxic, Soft Finish, Widely Use, Easy to clean and install.
Headliner Installation Tips -Not Glue inclued
Step 1: First you need to remove the sagging Headliner;
Step 2: Find a good, large, clean area to work lay the headliner face up on the table Nest, spray the strong glue on the strip about 6" wide down the middle of the headliner, have a friend hold the materials up above the headliner while you use the plastic paint guide to smooth the materials on to the glue. After a couple of minutes, pull the materials back so that you can spray one of the sides that dones not yet have glue on it, Spray the adhesive, and repeat the process of smoothing. continue with this until the fabric has been glued down on the entire surface of headliner;
Step 3: After the glue has a night to set up, turn the headliner over. Cut some slits in the fabric to make it easier to wrap around the edge and, run a head of glue along the edge of the headliner and fold the fabric over and press it down. Try to make the fabric conform as closely to the edge as possible;
Step 4: Cut holes in the fabric for the dome light, sun visor and the clips that hold it up, replace the headliner.
Note:
1. The roof liner fabric is folded for delivery, not delivered in rolls. Used a dish towel and a steam iron to remove wrinkles from being folded during shipping.
2. Just measure the length and width of your vehicle's headliner to make sure you order enough material to recover it. If you need other size, pls contact us first.
Tips: Suggesting slightly larger size!
Share
